BLUESOLAR PWM-LCD&USB 12/24V-5A 1702-87664

Produkta apraksts

LCD-display for status monitoring and set-up. Over-discharge of the battery can be prevented by connecting all loads to the load output. The automatic load output will disconnect the load when the battery has been discharged to a pre-set voltage. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. The connect and disconnect voltages are adjustable. Day/night timing of the load output allows for a pre-set ON-time after dusk. Preprogrammed algorithms for AGM, GEL, Flooded or LiFePO4 batteries (with internal BMS only). Two 5V USB outputs: maximum current (both outputs combined) 2A.— Solar volt. max 28/55 V, self-consumption <10mA. Protections: reverse polarity bat (fuse), output short circuit, over temperature. Overload protection: shut down after 60 s in case of 130% load or 5 s in case of 160% – short circuit: immediate shut down. Operating temp. -35°C … +60°C, RH max 95% (non-cond)

1702-87664

Preces piegāde

Piegāde 🚚 ar kurjeru - maksas pakalpojums vai bezmaksas piegāde Rīgā un Latvijā pasūtījumiem virs 100 EUR.

Bezmaksas preču saņemšana mūsu veikalā 📍 Daugavgrīvas iela 104, Rīga.

Preces Atgriešana

Preces Apmaksa